Atmosphere Excite SX – Lvl.2 Interconnects
Excite SX RCA interconnects start with two 5th Generation Tricon Silver Matrix geometries running in parallel. SR then adds two hand-made Air String Geometries featuring pure 6-9’s silver conductors in an Air Dialectric. For XLR, SR runs four Air String geometries for a genuinely balanced XLR cable. SR then apply the same High-Frequency Long Duration Conditioning Process originally developed for the state-of-the-art SRX cable loom. The same conditioning process that elevates the Purple Fuses making it the world’s highest performance fuse for audio applications. To lower Excite SX’s noise floor and to improve musicality, they add new Carbon Fibre UEF Tuning discs internally at strategic points along the cable shield and inside the connectors for increased resolution without harshness or loss of high-frequency air and extension. Excite SX is also equipped with grounding wires that allow you to connect the shields of the cables to an outboard ground point and are supplied as standard. The ability to separate the cables shields from the components means noise picked up along the shield is bypassed from your system’s components to house ground for a lower noise floor and improved holography. And for a lower noise floor still, ground your cable’s shields to an optional Synergistic Research Ground Block or Active Ground Block. Lastly, SR makes voicing Excite SX to your system easy with an included Galileo SX Gold UEF tuning bullet. Simply listen to the cable with and without the Galileo SX Gold Tuning Bullet and pick the option that makes music in your system.
After perfecting the most natural-sounding and holographic cables in SR's history, they set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. SR experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. SR even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond the previous Tesla Coil conditioning protocol.
Please allow 14 day factory lead-time.
Specifications
Atmosphere Excite SX – Lvl.2 Interconnect Specifications:
• Silver Matrix: Mono crystal conductors with a separate ground conductor from shield
• Dielectric: Teflon
• Shielding: UEF Ground Plane Technology
• Geometry: 3 channel single ended / 8 channel balanced
• Listening tests performed for signal direction before build
• Silver Air Strings: 99.9999% pure mono crystal silver conductor
• 4 separate conductors RCA / 8 separate conductors XLR
• Dielectric: Air (sealed)
• Shielding: UEF Ground Plane Technology
• UEF Level 1 OTSP Field Filter (outside the signal path)
• Handmade in our California factory
• Silver Teflon SR 20 RCA -or- Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors
• Optional voicing for increased warmth, liquidity
• 38 (RCA) 50 (XLR) point-to-point hand soldered connections
• Atmosphere Level 3 UEF Matrix Treatment: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides.
• 1 Termination for Atmosphere Tuning Module (Red)
• Ground Plane Termination
• Silver Solder: 4%
• Hand build time: 4 hours
• Quantum Tunneling: Connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely
• Secondary UEF Blue Treatment originally developed for SR Blue Fuses
• 5 day Burn In: 2-step process
• Handmade in our California factory